Oh well, after reading a gadzillion posts here, and deciding to try and build a kit, and building a "shop" in order to have somewhere to do it, my first topic post comes down to a non-build related question. I'm dissappointed.
My "shop", and I'm being liberal, is relatively small...about 14 x 14, and wholly contained within my basement. Recently, with the PSYCHO weather we've been having, the humidity has shot up into the low 60% range. I can tell this is going to be an issue in perpetuity. I have one of those cool Sears de-humidifiers that runs automatically based on whatever range you want the humidity to be in. The condensate collects in a 1.5 gallon tank that must be emptied periodically. Here's the issue: the shop is so small, and so "tight" that the heat from the condensor/exhaust on the de-humidifier now runs the temp in the room up into the low 80 degree range.
Any suggestions on what to do? Oh...and the room is entirely enclosed, no windows no vents, etc., - although I might be able to put some venting in the drop ceiling.
